IWRA Executive Office

OS1s Hydrological diagnosis and forecasting: Advanced computational approaches

abstract 478

Hydrologic forecasting of fast flood events in small catchments with a 2D -SWE model. Numerical model and experimental validation.

Author(s): Luis Cea, Jerónimo Puertas, Luis Pena, Marta Garrido

Keyword(s): flood forecasting, storm events, small catchments, numerical model, 2D shallow water equations.

Article:

Poster:

Session: OS1s Hydrological diagnosis and forecasting: Advanced computational approaches

AbstractShallow water models are

extensively used to compute the flow field and flood regions in rivers. The input data required in such models are the

topography, the bed roughness coefficient, and the water discharge flowing through the reach under study. The water

discharge is usually obtained using simple hydrologic models based on empirical formula, which relate the water

discharge with the precipitation intensity, the catchment surface, mean slope and soil. Usually such models contain

simplified representations of surface runoff, evapotranspiration, and channel flow. In addition, the water discharge is

introduced at one specific cross section in the hydraulic model, while in reality there is a continuous spatially

distributed contribution of runoff to the river discharge.

Recent advances in the numerical schemes for solving

the two-dimensional shallow water equations permit modelling water flow over complex topography with extremely

small water depths, including the propagation of wet-dry fronts. This fact, together with the continuous increase in

computational efficiency, opens up the possibility of computing the surface runoff due to precipitation in a whole

watershed. Precipitation surface runoff is actually a very shallow water flow, and therefore it should be well

represented by the two-dimensional shallow water equations.

This paper presents a two-dimensional shallow

water model which computes at the same time the precipitation runoff, flow velocity and water surface levels in the

entire watershed, including the all the river reaches. The depth averaged mass and momentum conservation equations

are solved, considering the effects of bed friction, bed slope, precipitation and infiltration. Hence, the model has a

conceptual and mathematical ground much stronger than classic hydrologic models. The numerical problems which

arise from the small water depths, the presence of wet-dry fronts and the large bed friction forces, are successfully

solved in the present model.

The only parameters of the model which need calibration are the bed friction

coefficient and the infiltration properties of the soil. The effects of small scale microtopography which is not resolved

by the model, must be included via the bed friction coefficient, in the same way as the effects of ripples and dunes in

rivers are included in the bed friction stress. The sensitivity of the model to bed friction and infiltration parameters has

been studied. When the bed friction coefficient and infiltration can be accurately identified, and the topography is well

defined, the predictions of the model are very satisfactory, and this is shown in the validation results presented in this

paper. In order to avoid the uncertainty in the parameter determination of a real catchment, experimental validation

of the model is presented in simple 1D and 2D geometries. Several experiments are modelled, with different

topography, surface roughness, and rainfall intensities and durations. The agreement with experimental results is very

satisfactory.

The model presented can be used in the forecasting of flood regions in catchments due to storm

events, as well as in the design of hydraulic structures to mitigate and control flood risks.

Events

The congress

Programme

Practical Infos

Hydrologic forecasting of fast flood events in small catchments with a 2D -SWE model. Numerical model and experimental validation.